About
Symoil Ball Drop Frac Sleeve is run in hole as part of liner and spaced out on planning fracturing depth. The sleeve is activated by different sizes of balls. After fracturing the ball seats can be milled away to full-bore of the liner.
The Ball drop sleeves come in Re-closable or permanently shut off configurations
For the Re-closable sleeves, manipulating the sleeve can be done using two types of shifting tools:
• Shifting tool «Predator»
• Shifting tool for small diameter «Flex»
Features
• Fully compatible with either cemented or open hole completion
• Multi-open/close functionality
• Configurable nozzles and activation pressures
• Continuous Pumping
• Longer Laterals
• Provides optimal distribution of frac
• Reduced time of completion well
| Casing / Liner size – in – [mm] | OD Sleeve – in – [mm] | ID – in – [mm] |
|---|---|---|
| 2.875 – [73] | 3.75 – [95.3] | 2.375 – [60.3] |
| 3.5 – [88.9] | 4 – [101.6] | 2.875 – [73] |
| 4 – [101.6] | 4.45 – [113] | 3.35 – [85.1] |
| 4.5 – [114.3] | 5.25 – [133.4] | 3.85 – [97.8] |
| 5 – [127] | 5.625 – [142.9] | 4.125 – [104.8] |
| 5.5 – [139.7] | 6.5 – [165.1] | 4.75 – [120.7] |
| 5.75 – [146.1] | 6.75 – [171.5] | 4.875 – [123.8] |
