Anchor Latch + Stinger Assembly

About

The Anchor Latch Seal Assembly is used when floating seals are not required. This assembly allows the tubing string to be in tension or compression. The tubing could be rotated – torque castellations on latch are shear pinned to prevent releasing during RIH. Upon set down the anchor latches into the packer and can be removed with eight to ten right-hand turns.

Features

Easy snap-in-snap-out procedure

Prevention of seal movement

High-performance seals available for hostile environments

Redress of the seal unit may be accomplished quickly and easily.

Rotation during RIH

Variable lengths PBR -> as short as 1.5ft to lengths of 20ft

Tool OD – in – [mm]	Tubing Size – in – [mm]	Sealbore Diameter – in – [mm]	ID – in – [mm]
Tool OD – in – [mm]	3.47 – [88.1]	2.375 – [60.3]	2.688 – [68.3]	1.94 – [49.3]
3.968 – [100.8]	2.875 – [73]	3 – [76.2]	2.375 – [60.3]
4.25 – [108]	2.875 – [73]	3.25 – [82.6]	2.5 – [63.5]
5.06 – [128.5]	3.5 – [88.9]	4 – [101.6]	3 – [76.2]
5.81 – [147.6]	4 – [101.6]	4.75 – [120.7]	3.5 – [88.9]
5.81 – [147.6]	4.5 – [114.3]	5 – [127]	4 – [101.6]
6.31 – [160.3]	4.5 – [114.3]	5.25 – [133.4]	4.25 – [108]
7.5 – [190.5]	5.5 – [139.7]	6 – [152.4]	4.75 – [120.7]
8.04 – [204.2]	6.625 – [168.3]	7 – [177.8]	5.84 – [148.3]
10.06 – [255.5]	9.625 – [244.5]	9 – [228.6]	8 – [203.2]